JDO Stylo REMOTE CONTROL WALL SWITCH

JDO Stylo REMOTE CONTROL WALL SWITCH
www.nancyquek.com

Product Specifications

Power source	230V -20% +15%, 50/60Hz ¹
Connection	Using LIVE wire only, no NEUTRAL wire is required.
Load handling capabilities	300W (1-gang switch) 300W per gang (2-gang switch) 250W per gang (3-gang switch)
Luminaire types	Incandescent Halogen, Fluorescent, Compact Fluorescent
Overload protection	By Fuse
Number of remote control channels ²	For 1-gang and 2-gang switch, user can select channel from 1, 2, 3 or 4. For 3-gang switch, factory presets RC channels for load 1, 2, 3 to channel 1, 2, and 3.
Overall size	86 x 86 x 32mm, fits into standard wall switch enclosure.
Operating temperature	-10~24°C
Remote controller (RC)	Infrared type
Effective range of controller	Up to 80 feet on-axis
Remote controller battery	2 x AAA

Note :
1. Low voltage limit is applicable to filament lamps only. For fluorescent lamps, low voltage limit depends on starter characteristics.
2. User can re-use any of the 4 channels for each room. As for infrared signal cannot go through opaque walls, the channel can be re-used in other rooms without causing interference.